Simple temperature controlled fan regulator

Some time ago I pulled out temperature fan controller from one of old ATX PSU.
With 12.2V input it provides 4.5V at 25°C and raises output voltage till 11.8V at ~70°C. After changing Q2 to higher voltage transistor and tuning of R4-R5 this divider this controller should be suitable for 12V fans with 24/36/48V input.
Here is result of my reverse engineered schematic:

Leave a Reply

Your email address will not be published.

You may use these HTML tags and attributes: <a href="" title=""> <abbr title=""> <acronym title=""> <b> <blockquote cite=""> <cite> <code> <del datetime=""> <em> <i> <q cite=""> <s> <strike> <strong>